WUTA Leather Skiver, Upgraded Black Leather Skiving Machine, Skiving Machine with with D-Clip, Thickened Blade for DIY Leather Thinning Work

SpecificationsName: Leather Skiving MachineMaterial: 304 stainless steel,The surface is black plated for excellent rust resistance.Machine Size: 5.90in * 5.12in *3.23inBlade Size :3.86in * 0.7inCutting width:0-3. 15inchThinning thickness: It is recommended to thin to 0.8mm above. Applicable leather: Applicable leather: Vegetable tanned leather, bridle leather, belt leather, hard leather, thick leather, etc.Machine Weight about 1.5kg

• 【New Upgrade】From the original ordinary models upgraded to the current bright black rust-proof models, made of 304 stainless steel, the surface through the black plating treatment, tough and durable more difficult to rust.
• 【High Quality and Durable】Increased the area of the chassis, stronger support, more convenient for you to perform manual leather thinning, press the handle down, the rollers leave the work panel, then insert the leather and pull the leather strip back to complete the peeling operation. You can use this machine to peel small straps, belts and watch straps.
• 【Easy to Operate】Wooden handle is added for a more comfortable grip, and the double bearing roller design allows you to go leather thinning more smoothly.
• 【Adjustable】There are adjusting screws at both ends of the machine, you can freely adjust the thickness of thinning, sufficient grease, slightly soft leather can be thinned to about 0.5 mm; insufficient grease, harder leather, the thickness of thinning will be slightly thicker than the former,The maximum width of the leather that can be skived is 8cm/3.15 inches. The newest model has increased the blade positioning device, don't worry about the blade shift.
• 【Manual Leather Thinning Machine】Equipped with 10 black sharp blades and 1 G-clip. You can hold the machine by hand or use the G-clamp to fix the machine on the table and pull out the leather.