SINOCMP 101-1012-009 Hydraulic Motor Low Speed High Torque Direct Replacement for Eaton Char-Lynn H Series Construction Agricultural Machinery, 353 RPM 2059 lb-in 15 GPM

Time-Tested for Char-Lynn H Series EngineeringThis 101-1012-009 replacement hydraulic motor uses industry-proven spool valve technology based on the time-tested for Char-Lynn drive set. With only three moving components (gerotor-star, drive, and shaft), this design offers:High efficiency performance – Minimal internal leakage for maximum power transferOptimized drive running angle – Reduces internal wear and extends motor service lifeThree-zone pressure design – Inlet, return, and case pressure zones optimize performance and sealing under high-pressure conditionsInstant shaft reversal – Simply change direction of flow through the motorSmooth operation – Stable performance across the entire speed rangeFor general industrial applications, H Series motors are excellent, providing high torque at low speedsComplete SpecificationsModel Number: 101-1012-009Series: H SeriesType: Spool Valve Gerotor Hydraulic MotorDisplacement: 9.7 cu in/rev (159 cc/rev)Max Continuous Pressure: 1650 PSI (114 bar)Max Intermittent Pressure: 2250 PSI (155 bar)Max Continuous Flow: 15 GPM (57 L/min)Max Intermittent Flow: 20 GPM (76 L/min)Max Continuous Speed: 353 RPMMax Continuous Torque: 2059 lb-in (233 Nm)Max Intermittent Torque: 2824 lb-in (319 Nm)Mounting Type: 4-Bolt Standard FlangePilot Diameter: 1.75 inch (44.45 mm)Bolt Circle: 3.25 inch (82.55 mm)Mounting Bolt Size: 3/8-16 UNC-2BShaft Type: 1 inch straight keyed, Woodruff key, 1/4-20 UNC-2B threaded endKeyway Size: 0.25 inch (6.35 mm)Ports: 7/8-14 UNF-2B SAE O-ring side ports, size 10Case Drain: NoneHousing: Cast iron, primer low gloss black paintDesign Code: 009Seal Material: Buna-N (standard)Min Oil Viscosity: 100 SUSRecommended Viscosity: 100-200 SUS (20-43 cSt) at operating tempRecommended Filtration: ISO 4406 cleanliness code 18/13Max Operating Temp: 180°F (82°C)Min Operating Temp: -30°F (-34°C)Overall Length: 7.06 inch (179.3 mm)Overall Height: 3.87 inch (98.3 mm)Overall Width: 3.31 inch (84.1 mm)Weight: 14.40 lbs (6.53 kg)Compatibility InformationThis 101-1012-009 hydraulic motor serves as a replacement for Eaton Char-Lynn H Series applications. It is compatible with the following configurations:101-1012-009 (primary model number)101-1012 (base model)4-Bolt standard flange with 1.75" pilot, 1" keyed shaft specificationOMPH/BMPH series replacement motorsReplaces models: 101-1009, 101-1010, 101-1013 (same H Series family)This motor offers equivalent performance to similar models from Eaton Char-Lynn, providing a cost-effective alternative without sacrificing reliability. All hydraulic motors promoted as a drop-in replacement meet or exceed the specifications of the motor they are replacing for fit, form, and function.Replacement Parts Information:Replacement Buna Seal Kit: 60540-000 (for 009 design)Replacement Viton Seal Kit: 60544-000 (for 009 design)Replacement Gerotor (009 design): 8277-004Replacement Drive (009 design): 8664-000Replacement Output Shaft: 7360-001Repair Manual: #7-117Repair Parts Drawing: #6-121

• [🔧] Direct Swap – 9.7 cu/in Displacement: This hydraulic motor 101-1012-009 replaces for Eaton Char-Lynn H Series models with 9.7 cu in/rev (159 cc/rev) displacement . The 4-bolt flange mount with 1.75 inch pilot diameter and 3.25 inch bolt circle lets this 101-1012-009 hydraulic motor bolt directly onto car wash brushes, agricultural harvesters, and food processing equipment without modifications.
• [⚙️] High Torque – 2059 lb-in at 353 RPM: H series hydraulic motor delivers 2059 lb-in (233 Nm) continuous torque at 353 RPM, with max pressure 1650 PSI and max flow 15 GPM continuous . The Gerotor spool valve design with three moving parts (gerotor-star, drive, shaft) helps this 101-1012-009 replacement hydraulic motor maintain consistent LSHT (low-speed high-torque) performance for demanding applications.
• [🛢️] SAE O-Ring Ports – 7/8-14 Side Ports: For Eaton Char-Lynn style hydraulic motor features 7/8-14 UNF-2B SAE O-ring side ports for reliable leak-free connections, accepting fittings for SAE J1926 . The O-ring design on this 101-1012-009 hydraulic motor creates seals without thread sealant, saving installation time. No case drain required.
• [🏗️] Keyed Shaft – 1 Inch with Woodruff Key: This 101-1012-009 replacement hydraulic motor comes with 1 inch straight keyed shaft, 1/4 inch Woodruff keyway, and 1/4-20 UNC-2B threaded end hole . Cast iron housing with primer low gloss black finish withstands harsh environments. Max operating temperature 180°F.
• [📦] Ready-to-Install – Complete Assembly: Box contains one hydraulic motor 101-1012-009 (H Series specification). Important: Verify 1.75 inch pilot diameter, 4-bolt pattern (3.25 inch bolt circle), and 1 inch keyed shaft before ordering . Flush hydraulic lines prior to installation. Intermittent operation refers to running motor no more than 10% of each minute . Replacement seal kit 60540-000 (Buna-N) or 60544-000 (Viton).