Aqualine PRV4 Lead-Free Brass Pressure Regulator - NPT/Union - Size : 3/4"

Aqualine PRV4 Lead Free Brass Pressure RegulatorThe PRV4 Pressure Regulator from Aqualine is lead free brass construction. Has brass or durable PVC bonnet and stainless steel nuts and bolts. Double union connections. This item is rated for constant (static) pressure and will reduce the pressure in your system to the desired PSI. Unit is adjustable from 25 - 75 PSI and factory preset at 50 PSI.Installation Tips:Flush dirt and scale from supply pipeInstall regulator vertically or horizontally (upright or inverted), but the regulator must be installed with the arrow in the direction of flowRegulator is preset at 50 PSI. To adjust, loosen lock nut and turn adjusting screw clockwise to increase, counterclockwise to decrease, then re-tighten lock nutThis regulator has a built-in thermal expansion bypass. If the inlet pressure is higher than the discharge setting of the water heater (typically 150 PSI) or if there is a check valve or backflow preventer installed on the line, you must make provisions for pressure relief protection to protect your plumbing system and its componentsShould be installed in an accessible locationMaintenance Tips:To clean strainer or replace seat/stem module shut-off supply, loosen locknut and back off adjusting screwReplace module and reassemble valveRe-adjust pressure settingIAPMO Listed; CSA Certified; NSF Listed; Certified to NSF/ANSI 372